The most important factor in ensuring safe working conditions in any laboratory is good ventilation of work area. Our fume hoods help not only fully protect laboratory staff against hazardous vapors and fumes but, due to the number of design peculiarities, make their work easier.
-
The system of balances installed outside work area allows sash to be fixed at desired height.
-
Lamps fixed above work chamber provide evenly-spread lighting of required intensity.
-
Plugs and switches are installed to the right and left sides of portal or in the center of work surface.
-
All hoods are come with valves, polypropylene drain cups, steel or polymeric sinks.
-
Air exhaust may be installed in lower part of fume hood.
-
Hood legs have adjustable height.
-
We offer a wide selection of countertop materials depending on work conditions (countertop material can be selected here).
Hoods may be equipped with vacuum and gas valves and vacuum controllers, and can be made in non-standard sizes and shape. Hoods are connected to ventilation system via standard socket: a square with 250 mm side or a ring with diameter from 200 mm up. Upon request, fume hoods may be equipped with channel-type exhaust ventilators (including low-noise ventilators) with production output 600-9000 m3, or with ventilation systems.
We offer three main models of standard fume hood:
Series 1-1 (1-1А) - Standard fume hood.
Series 1-2 - Tabletop fume hood.
Series 1-3 - Fume hood for large installations.
